Hello:
I have a library of hundreds of older drawings that print from model view using the plot-by-window method. I also regularly plot three different sizes of paper.
In order to streamline this plotting process, I've created named page setups in a .dwt file with an empty title-border. And in the .dwt, these settings remain exactly as they should be (including the size and location of the plotting-window).
When I import these named page setups into a .dwg file, the import is successful but the plotting-window is not exactly where it should be. The plotting window is often shifted significantly off its original location as defined in the .dwt file.
I've ensured my title-borders are in the exact same place (with the lower-left corner at 0,0,0) and are of the exact same size.
This appears to be a quirk because the plotting window is always shifted in different ways. Out of 6 drawings, only one drawing "imported properly" (without having to redefine the plotting-window).
Are there any solutions to this issue?
P.S. As the first AutoCAD version I learned was 2012, I'm fully aware and supportive of Layout view. There simply isn't time to convert hundreds of drawings over to Layout view from Model view all at once so this is a temporary solution until all drawings are converted.
Thank you,
-- GoldenEye15